Sepheo sa Ts'ebetso bakeng sa Likopo tse Matlahalang
Womic STEEL ke sehlahisoa se lemohuoang lefatšeng ka bophara sa li-sulecor tsa boleng bo holimo. Li-tubes tsena ke likarolo tsa bohlokoa tsa litsamaiso tsa Conveyor, li sebelisoa haholo ka li-trishe, meepo, meroalo, likompele, ho sebetsa lijo le indasteri e 'ngoe. E tsebahala ka ho tšoarella ha bona, ho nepahala ho ho ikamahanya le maemo, ho hlophisoa ha li-rouck ha ho etselitsoe li-tuller tse fapaneng.
Lihlahisoa tsa maiketsetso le litlhaloso
Pectic Steel o tiisa tšebeliso ea lisebelisoa tsa meraro bakeng sa matla a phahameng, a apere khatello ea maikutlo le ts'ireletso ea khatello ea maikutlo.
Lintho tse tloaelehileng tsa lintho tse tloaelehileng
- Carbon Sense: Q195, Q235, Q345, S235Jr, S355JR
- Ts'epe e sa beng le mabali: 201, 304, 316L (e loketseng libaka tse khutsitseng)
- Allow steel: 16mn, 20mn2, 30Mnsi (e loketseng likopo tse matla)
- Moroallo o monate: Bakeng sa ho tsitsipana hoa lihlahisoa tsa tsamaiso
Melao e sebetsang
Lihlahisoa tsa rona li latela mefuta e mengata ea maemo a machaba le ea tikoloho:
- Astm: Asst A513, ASTM A106, ASTM A312
- EN: En 10210, en 10219, en 10305
- Jis: Jis G3445, Jis G3466
- Iso: Iso 10799
- Sans: Sans 657-3 (litekanyetso tsa Afrika Boroa tsa Afrika bakeng sa ho kopanya tubing)
Ts'ebetso ea Tlhahiso
Wheel Speel o sebelisa mekhoa ea tlhahiso le lisebelisoa tsa boemo bo fanang ka thepa e hlakileng le tse tšepahalang tsa roll.
1. Khetho ea lintho tse lekaneng
Lichelete tsa tšepe tsa boleng bo holimo li khethoa ka hloko mme li lekoa ka thepa ea mochini le ea lik'hemik'hale.
2. Tube mofuta oa
- Cold Rolling: E hlahisa li-tubes tse halikiloeng ka botenya ba junifomo le sebaka se boreleli.
- Ho chesa: E loketseng ka litlhahiso tse koahetsoeng ka matla ka matla a phahameng le khanyetso e matla.
- Liphetoho tse ngata tse phahameng: E fana ka li-weld tse matla le tse se nang litsisane.
3. Ho nepahala ha
Sesebelisoa sa CN CNCN se tiisa li-tubense ho etsoa ka bolelele ba eona, makhapetla le literata tsa lebota.
4. Phekolo ea mocheso
Phekolo ea mocheso ea moea (ho ikatisa, ho tloaela, ho tima, ho lekanya, ho tiisa botebo) ho matlafatsa ho hanyetsa.
5. Phekolo ea bokaholimo
- Ho khetha le ho feta: Ho tlosa litšila le ho ntlafatsa tsitsipano ea Corrosanion.
- Ho hatella: E eketsa sekala sa zinc bakeng sa ts'ireletso ea nako e telele ea mafome.
- Ho penta kapa ho koahela: Ea boikhethelo bakeng sa ho kopitsa mebala le ts'ireletso e eketsehileng.
6. Tlhahlobo ea boleng
Li-Tibes tsohle li theoha taolo ea boleng bo boima, ho kenyelletsa:
- Tlhahlobo ea likarolo: Bokaholimo bo ka ntle le kametoriHo mamella ho nakong ea ± 0,1 mm.
- Liteko tsa mochini: Matla a tšositsoeng, a hlahisa matla le liteko tsa nako.
- Tlhahlobo e se nang thuso (NDT): Ultrasonic le Eddy Teko ea hajoale.
- Bokantle ba tlhatlhobo: Ho netefatsa bofokoli bo sa sebetseng.
Boholo bo boholo le mamello
Womic Steel o fana ka mefuta e mengata ea li-roller tse fapaneng, e nang le monyetla o motle ho tsamaisa litlhoko tsa hau.
| Paramente | Mefuta |
| Bophara bo kantle (od) | 20 mm-- mm |
| Botenya ba lebota (WT) | 1.5 mm - 15 mm |
| Bolelele | Ho fihla ho limithara tse 12 (boholo bo fumanehang) |
| Ho mamella | A lumellana le en 10219 le iso 2768 Melao ea 2768 |
LINTHO TSE HLAHANG
1.Setumeliso tse ikhethang
Etselitsoe ho mamella lijaro tse boima le maemo a boima ba ho sebetsa.
2.Ho itlhopakisa
E fumaneha ka tšepe e nang le bosuti kapa e se nang masapo bakeng sa mongobo le libaka tse mabifi tsa lik'hemi.
3.Ho nepahala le botsitso
Ho nepahala haholo le mahlomoleng ho fokotsa vibral le lerata litsamaisong tsa thuto.
4.Tlhokomelo e tlase
Ts'ebetso ea nako e telele e fokotsa litšenyehelo tsa nako ea nako ea nako ea nako ea nako.
Likopo
Womic Stives Suller li-tuller li sebelisoa haholo ho:
- Logistics le Warehousing: Litsamaiso tsa ho hlophisa, li-reraheli tsa Roller.
- Meining le Metalurgy: Litsamaiso tsa Litefiso tsa ho Ts'oasa Liphoofolo.
- Ts'ebetso ea lijo: Li-steel tse se nang litsie tse se nang litsie libakeng tse hloekileng.
- Lipuisano le Litefiso: Litsamaiso tsa Congo tsa Conveyor.
- Lik'hemik'hale le alomacetical: Li-roller tse thibelang li-roraros tse thibelang lik'hemik'hale.
Tharollo ea moetlo
Re fana ka likhetho tse se nang mokhoa o ikhethileng ea ho lumellana le litlhoko tse ikhethang:
- Boholo bo sa tloaelehang: Litekanyetso tse sebelisoang bakeng sa lisebelisoa tse khethehileng.
- Phekolo ea Bongata: Ho makatsa, ho penta kapa ho nka lehlakore ho fumaneha.
- Likhetho tsa ho paka: Ho paka ka moetlo ho netefatsa lipalangoang tse bolokehileng.
Sephetho
Womic Stives Luller Marvey ea Womic STVERS e entsoe ho kopana le litekanyetso tse phahameng tsa indasteri le ho fana ka tšebetso e ikhethang. Ka bokhoni ba 'mampoli ba tsoetseng pele ea tlhahiso, taolo ea boleng ba mekhoa le khetho ea tloaelo, lihlahisoa tsa rona ke khetho e tšepahalang lefats'eng e fapaneng lefatšeng ka.
Bakeng sa tlhaiso-leseling e batsi kapa mantsoe a qotsitsoeng, ikopanye le Womic scel kajeno!
Imeile: sales@womicsteel.com
MP / whatsapp / wechat:Victor: + 86-155575100681 Jack Jack: + 86-18390957568
Nako ea poso: Jan-08-2025